Products
Products
SENSAIER
CBA Finishing Boring Heads
CBA Finishing Boring Heads
Category：
Keywords：
CBA Finishing Boring Heads
TEL/WhatsApp：
Description:
1. Each boring head is equipped with three different insert holders to extend boring ranges.
2. The service life of insert will be prolonged with internal cooling design.
3. Each division for the adjustment is 0.01mm
Notice：No.1insert hold is included in the price of boring tool，while NO.2 and NO.3 insert holders shall be ordered separately
Model | Insertholder | Forward boring | Reverse boring | LBA No. | Insert/Screw/Wrench | Weight(kg) | |||||
Boringrange φD（mm） | L | L1 | Boringrange φD（mm） | L2 | L3 | B | |||||
CBA20 | ENH1-1 | 20-25 | 30 | 27 | / | 10.5 | 19 | 10 | LBK1 (11mm) | TP*08020*L/M2.0/T6 | 0.05 |
ENH1-2 | 25-29 | 30-31 | |||||||||
ENH1-3 | 30-34 | 30-36 | |||||||||
CBA25 | ENH2-1 | 25-33 | 34 | 31 | / | 11.5 | 21 | 12.5 | LBK2 (14mm) | 0.15 | |
ENH2-2 | 32-40 | 36-40 | |||||||||
ENH2-3 | 39-47 | 39-47 | |||||||||
CBA32 | ENH3-1 | 32-43 | 41 | 37 | / | 10 | 25 | 16 | LBK3 (18mm) | TP*08020*L/M2.0/T6 | 0.25 |
ENH3-2 | 41-51 | 46-51 | |||||||||
ENH3-3 | 50-60 | 50-60 | |||||||||
CBA40 | ENH4-1 | 41-56 | 50 | 42 | / | 14 | 29 | 20 | LBK4 (22mm) | TC*11020*L/M2.5/T8 | 0.45 |
ENH4-2 | 51-67 | 53 -63 | |||||||||
ENH4-3 | 64-77 | 64-79 | |||||||||
CBA52 | ENH5-1 | 52-74 | 60 | 56 | 62-70 | 19 | 34 | 25.5 | LBK5 (28mm) | TC*11020*L/M2.5/T8 | 0.9 |
ENH5-2 | 64-87 | 65-82 | |||||||||
ENH5-3 | 77-100 | 78-95 | |||||||||
CBA68 | ENH6-1 | 68-103 | 70 | 66 | 80-100 | 22 | 45.2 | 32.5 | LBK6 (36mm) | 1.75 | |
ENH6-2 | 95-128 | 94-126 | |||||||||
ENH6-3 | 118-153 | 118-150 | |||||||||
CBA100 | ENH6-1 | 100-152 | 70 | 66 | 112-153 | 22 | 45.2 | 45.5 | LBK6 (36mm) | 2.46 | |
ENH6-2 | 126-179 | 126-179 | |||||||||
ENH6-3 | 151-203 | 150-203 | |||||||||
CBA Finish Boring Head Manuals
Operating Instructions：
Checking before adjustment:Make sure right inserts mounted and screwfor insert holder fastened properly.
Step 1:Unlock the clamping screw(See figure 1)anti-clockwise.
Step 2:Move the insert holder(See figure 2,3)to the required working diameteraccording to the reference line marked on the tool and insert holdet.
Step 3:Fasten the clamping screws(See figure 4)clockwise.
Step 4:Loosen the locking screw(See finure 1)anti-clockwise.
1.Use this tool within the suggested boring range.
2.Please loosen the adjusting screw before adjusting.
3.Please stop the adjustment when it is faced with a strong resistance.And make sure:
A lf the locking screws is unlocked;
B.lf the adjustment is within the suggested work range;
4.The machine spindle shall run anti-clockwise when the function of back boring is adopted.
5.Lubrication grease shall be injected through the oil-feed hole properly(till some lubrication greasecan be found on the face of adjusting panel).
6.Disassembling of the tool without suggestion is not suggested.
Related Product
Enquiry
Thank you for visiting the official website, if you have any suggestions or cooperation intention, please contact us through the following ways, we will reply as soon as possible, thank you!
TEL/WeChat
Address
NO. 3, JINGDE INTELLIGENT MANUFACTURING INDUSTRIAL PARK, RENHE NORTH ROAD, DEYUAN STREET, PINGYUAN COUNTY, DEZHOU CITY, SHANDONG PROVINCE
Please provide your contact information, and we will reach out to you within 24 hours.
PRODUCTS
Scan the QR code
Follow on WeChat
Scan the QR code
Follow on WhatsApp