Products
Products
SENSAIER
NBJ16 Micro-Finishing Boring Kits
NBJ16 Micro-Finishing Boring Kits
Category：
Keywords：
NBJ16 Micro-Finishing Boring Kits
TEL/WhatsApp：
Description:
Model | D*d*L(mm) Dimensions | Fine-Tune TheStroke(mm) | Fine-tuning Accuracy(mm) | Boring template(mm) | Adaptable toolholder | Connector diameter | (KG) |
NBJ16 | 63*16*50 | 6 | 0.01 | 6-51 | LBK Series | 36 | 1.6 |
Accessory name | Model | Accessories quantity/piece | Compatible Insert model | Boring range MM |
NBJ16 holder | NBJ16 | 1 | - | 6-51 |
LBK Tool holder | BT40-LBK6-65L | 1 | - | - |
NO.1 | SBJ1608-32 | 1 | TBGT0601**L | 8-11 |
NO.2 | SBJ1610-40 | 1 | TBGT0601**L | 10-13 |
NO.3 | SBJ1612-53 | 1 | TPGH0902**L | 12-15 |
NO.4 | SBJ1616-68 | 1 | TPGH0902**L | 16-21 |
NO.5 | SBJ1620-83 | 1 | TPGH1103**L | 20-26 |
NO.6 | SBJ1625-90 | 1 | TPGH1103**L | 25-31 |
NO.7 | SBJ1630-90 | 1 | TPGH1103**L | 30-36 |
NO.8 | SBJ1640-90 | 1 | TPGH1103**L | 40-46 |
NBJ16 Micro-BoringHead Manuals
Operating Instructions：
Step1 : Hold right boring bar in right hole.Make sure weldon part of boring bar is to the position of lock screw and cutting edze of boringbar is to the position of adjusting panel.Fasten the locking screw properly.
Step2: Loosen adjusting screw(see figure 4)anti-clockwise .
Step3: Enlarge the boring diameter by adjusting on the adjusting panel (See figure 2)anti-clockw'se,while adjusting clockwise is to reduce the boring range.
Step4: Adjust till the boring diameter required and lock the adjusting screw properly.
Operating Instructions：
1.Please use this tool within work range(6- 50mm)
2.Please loosen the adjusting screw before adjusting.
3.Please fasten the adjusting knob by means of special wrench properly
4.Please stop the adjustment when it is faced with a strong resistance or is unable to contirue adjustment, checkimmediately the of flowing points:
A.If the locking screws is unlocked;
B.lf the adjustment is within the suggested work range;
C.Over adjustment will bring damage to the tool irreversibly.
Related Product
Enquiry
Thank you for visiting the official website, if you have any suggestions or cooperation intention, please contact us through the following ways, we will reply as soon as possible, thank you!
TEL/WeChat
Address
NO. 3, JINGDE INTELLIGENT MANUFACTURING INDUSTRIAL PARK, RENHE NORTH ROAD, DEYUAN STREET, PINGYUAN COUNTY, DEZHOU CITY, SHANDONG PROVINCE
Please provide your contact information, and we will reach out to you within 24 hours.
PRODUCTS
Scan the QR code
Follow on WeChat
Scan the QR code
Follow on WhatsApp