Products
Products
SENSAIER
NBH2084 Micro Boring Head Sets
NBH2084 Micro Boring Head Sets
Category：
Keywords：
NBH2084 Micro Boring Head Sets
TEL/WhatsApp：
Description:
Model | Scope(mm） | Depth | Clamping Handle Length | Total Length | Adapter Inserts | Screws | Wrench |
SBJ-2008-32 | 8~11 | 32 | 20 | 80 | TBGT0601.L | M2X5 | T6 |
SBJ-2010-40 | 10~13 | 40 | 20 | 87 | TBGT0601.L | M2X5 | T6 |
SBJ-2012-53 | 12-17 | 53 | 20 | 98 | TPGT0902.L | M2.5X6 | TB |
SBJ-2016-68 | 16-21 | 68 | 20 | 110 | TPGT0902.L | M2.5X6 | TB |
SBJ-2020-83 | 20-130 | 83 | 20 | 123 | TPGT1103.L | M3X7 | T8 |
SBJ-2025-96 | 25~135 | 96 | 20 | 137 | TPGT1103.L | M3X7 | T8 |
SBJ-2030-115 | 30~140 | 115 | 20 | 152 | TPGT1103.L | M3X7 | T8 |
SBJ-20L20-100 | 120~280 | 84+BTL1 | 20 | 100 | TPGT1103.L | M3X7 | T8 |
NBH2084 Micro-Boring Head Manuals
Operating Instructions：
Step1:：Hold right boring bar(See figure 6) in right hole(See pic AB.C . Mlake sure weldon part of bar is to the position of lok screw ard autting edge of boring bar is to the position of adjusting panel.
Step2：Loosen adjusting screw anti-clockwise .
Stan3：Ealarge the boring diameter by adjusting on the adjusting panel(Se figure 2) anti-tlockwise,mhile adjusting clockwise is to reduce the boring range.
Step4：Adjust till the boring diameter required and lock the adjusting screw properly.
Instruction
Next
Next
Related Product
Enquiry
Thank you for visiting the official website, if you have any suggestions or cooperation intention, please contact us through the following ways, we will reply as soon as possible, thank you!
TEL/WeChat
Address
NO. 3, JINGDE INTELLIGENT MANUFACTURING INDUSTRIAL PARK, RENHE NORTH ROAD, DEYUAN STREET, PINGYUAN COUNTY, DEZHOU CITY, SHANDONG PROVINCE
Please provide your contact information, and we will reach out to you within 24 hours.
PRODUCTS
Scan the QR code
Follow on WeChat
Scan the QR code
Follow on WhatsApp